Mega Mamba 65 TSR
Diameter: 65mm (2.6 inches)
Total Length: 91.25 inches
Precision Slotted Booster: Filament wound Fiberglass
Nose Cone: 65mm Fiberglass with Stepped Aluminum Tip
Motor Tube: Filament Wound Fiberglass 54mm
Coupler Ebay Tube: 7" Filament Wound Fiberglass Composite
Fins: 3/32" G10 Fiberglass Composite Upgrade to 1/8: Below
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Included Accessories: 1/2 Kevlar Attachment, 2- 10/10 Rail Buttons
Graphics: Add $12.00 for Vinyl Graphics Below
Recommended Motors:J-L
Not Included, But Recommended Hardware: Aeropack 54mm L
Not Included, But Required Accessories: Drogue Parachute 1 Main Parachute
Messier 65 SR
Diameter: 65mm (2.6 inches)
Total Length: 60.29 inches
Precision Slotted Booster: G12 Filament Wound Fiberglass
Nose Cone: 65mm (2.6 inch) inch G12 Filament Wound Fiberglass Composite Tipped 5:1 Ogive
Motor Tube: G12 Filament Wound Fiberglass 54mm
Coupler Ebay Tube: 8" G 12 Filament Wound Fiberglass Composite
Fins: 3/32 G10 Fiberglass Composite
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Hardware: Cord Mounts, Nuts, and Washers (3)
Included Accessories: 1/2 Kevlar Attachment. 2-Rail Buttons
Graphics: Add Vinyl Lettering ($10.00) Contact for Custom Flames
Recommended Motors: H-K (Maybe an L if you're brave)
Not Included, But Recommended Hardware: Aeropack 54mm Retainer L.
Not Included, But Required Accessories: Drogue Parachute 12 inch. Main 48 inch
Great L1 or L2 Rocket.
Daedalus 65 (NEW!)
Diameter: 65mm (2.6 inches)
Total Length: 82 inches
Precision Slotted Booster: Filament wound Fiberglass
Nose Cone: 65mm Fiberglass with Stepped Aluminum Tip
Tail Cone: 65mm Fiberglass with 38mm Aluminum Low Profile Motor Retainer
Motor Tube: Filament Wound Fiberglass 38mm
Coupler Ebay Tube: 7" Filament Wound Fiberglass Composite
Fins: 3/32" G10 Fiberglass Composite (Mach 2 Flight Capable)
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 4-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Included Accessories: 1/2 Kevlar Attachment, 2- 10/10 Rail Buttons
Graphics: Add $12.00 for Vinyl Graphics Below
Recommended Motors:I-K
Not Included, But Required Accessories: Drogue Parachute 1 Main Parachute
EXcelerator 65
Diameter: 65mm (2.6 inches)
Total Length: 60.25 inches
Precision Slotted Booster: G12 Filament Wound Fiberglass
Nose Cone: 65mm (2.6 inch) inch G12 Filament Wound Fiberglass Composite Tipped 5:1 Ogive
Motor Tube: 54mm Filament Wound Fiberglass
Coupler Ebay Tube: 7" Filament Wound Fiberglass
Fins: 3/32 G10 Fiberglass Composite
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass CompositeStepped Bulkheads.
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Hardware: Shock cord mounts, nuts, and washers
Included Accessories: 1/2 Kevlar Attachment Cord. 2-Rail Buttons
Graphics: Vinyl Graphics Add $12.00 Below
Recommended Motors: H-L
Not Included, But Recommended Hardware: Aeropack 54mm Retainer L.
Not Included, But Required Accessories: Drogue Parachute Main Parachute
Chimera 65
Diameter: 65mm (2.6 inches)
Total Length: 61.25 inches
Precision Slotted Booster: Filament wound Fiberglass
Nose Cone: 65mm Fiberglass with Stepped Aluminum Tip
Motor Tube: Filament Wound Fiberglass 54mm
Coupler Ebay Tube: 7" Filament Wound Fiberglass Composite
Fins: 3/32" G10 Fiberglass Composite
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Included Accessories: 1/2 Kevlar Attachment, 2- 10/10 Rail Buttons
Graphics: Add $12.00 for Vinyl Graphics Below
Recommended Motors:H-L
Not Included, But Recommended Hardware: Aeropack 54mm L
Not Included, But Required Accessories: Drogue Parachute 12 inch. 1 Main Parachute 48 inch
Antigravity 65
Diameter: 65mm (2.6 inches)
Total Length: 60.25 inches
Precision Slotted Booster: Filament Wound Fiberglass
Nose Cone: 65mm (2.6 inch) Fiberglass Composite Stepped Aluminum Tip 5:1 Ogive
Motor Tube: G12 Filament Wound Fiberglass 54mm
Coupler Ebay Tube: 8" Filament Wound Fiberglass Composite
Fins: 3/32 G10 Fiberglass Composite
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Hardware: Cord Mounts, Nuts, and Washers (3)
Included Accessories: 1/2 Kevlar Attachment. 2-Rail Buttons
Graphics: Add Vinyl Lettering ($10.00)
Recommended Motors: H-K (Maybe an L if you're brave)
Not Included, But Recommended Hardware: Aeropack 54mm Retainer L.
Not Included, But Required Accessories: Drogue Parachute . Main Parachute
Great L1 or L2 Rocket.
Thunderhawk 65 SR-2
Perfect Expandable L1 Setup
Diameter: 65mm (2.6 inches)
Total Length: 37.5 inches (Standard mode) 55.4" (EXT mode) (Choose Below)
Precision Slotted Booster: Filament wound Fiberglass
Nose Cone: 65mm (2.56 inch) Fiberglass Nose Cone with Stepped Aluminum Tip
Motor Tube: Filament Wound Fiberglass 29mm or 38mm (Choose Below)
Coupler Ebay Tube: 7" Filament Wound Fiberglass Composite (Ext Mode Only)
Fins: 3/32" G10 Fiberglass Composite
Centering Rings: 1/8 G10 Fiberglass Composite
Bulkheads: 1-1/8" Glue in (Standard mode) 2-3/16" stepped added (Ext mode)
Deployment: Single (Standard Mode)Dual Deployment Capable. (Ext Mode) Get Electronics Bay Upgrade Kit.
Included Accessories: 1/2 Kevlar Tether, 2- 10/10 Rail Buttons. Eyebolts(1 standard) (3 EXT)
Graphics: Add $12.50 for Vinyl Graphics Below
Recommended Motors: G Motors H-128 (For L1 attempts 2200 ft)
Not Included, But Recommended Hardware: Aeropack 29 or 38mm L (MMT Dependent)
Not Included, But Required Accessories: Drogue Parachute 12 inch. 1 Main Parachute 48 inch
This rocket is fully configurable and can be flown short or long with excellent stability in either mode. This is a great L1 rocket and when extended can be flown dual deploy for L1 or L2 attempts
Area 51 Fiberglass 2.6"
Diameter: 65mm (2.6 inches)
Total Length: 70 inches
Precision Slotted Booster: Filament wound Fiberglass
Nose Cone: 65mm Fiberglass with Stepped Aluminum Tip
Motor Tube: Filament Wound Fiberglass 54mm
Coupler Ebay Tube: 7" Filament Wound Fiberglass Composite
Fins: 3/32" G10 Fiberglass Composite
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Included Accessories: 1/2 Kevlar Attachment, 2- 10/10 Rail Buttons
Graphics: Add $12.00 for GreenVinyl Graphics Below
Recommended Motors:H-L
Not Included, But Recommended Hardware: Aeropack 54mm L
Not Included, But Required Accessories: Drogue Parachute 12 inch. 1 Main Parachute 48 inch
Trivecta 329
Only a few left!
Diameter: 65mm (2.6 inches)
Total Length: 44.1 inches
Precision Slotted Booster: G12 Filament Wound Fiberglass
Nose Cone: 65mm (2.6 inch) inch G12 Filament Wound Fiberglass Composite Tipped 5:1 Ogive
Motor Tube: 3-29mm MMT
Coupler Ebay Tube:None
Fins: 3/32 G10 Fiberglass Composite
Bulkheads and Centering Rings: .3-1/8 G10 3-way Centering Rings 1-Glue in NC Bulkhead
Deployment: With Chute Release
Hardware: Cord Mounts, Nuts, and Washers (1)
Included Accessories: 4- 1/2" #5800 Kevlar Attachment. 2-Rail Buttons
Graphics:Add Vinyl Lettering ($10.00) Select Below
Recommended Motors:3-F Through 3-I
3 way Motor Retainer and hardware Included!
Not Included, But Required Accessories: Main Parachute
Skye Shredder 65
Only a few left!
Diameter: 65mm (2.6 inches)
Total Length: 89.25 inches
Precision Slotted Booster: Filament wound Fiberglass
Nose Cone: 65mm Fiberglass with Stepped Aluminum Tip
Motor Tube: Filament Wound Fiberglass 54mm
Coupler Ebay Tube: 9" Filament Wound Fiberglass Composite
Fins: 3/32" G10 Fiberglass Composite
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Included Accessories: 1/2 Kevlar Attachment, 2- 10/10 Rail Buttons
Graphics: Add $12.00 for Vinyl Graphics Below
Recommended Motors:J-L
Not Included, But Recommended Hardware: Aeropack 54mm L
Not Included, But Required Accessories: Drogue Parachute 1 Main Parachute
RIM-66 Standard. 2.6 Premium
Only a few left!
Diameter: 65mm (2.6 inches)
Total Length: 60.29 inches
Precision Slotted Booster: Filament Wound Fiberglass
Nose Cone: 65mm (2.6 inch) inch Fiberglass Composite Stepped Aluminum Tip 5:1 Ogive
Motor Tube: G12 Filament Wound Fiberglass 54mm
Coupler Ebay Tube: 7" Filament Wound Fiberglass Composite
Fins: 3/32" G10 Fiberglass Composite
Bulkheads: 2-3/16" Ebay Caps. 1-1/8" Glue In. G10
Centering Rings: 2-1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Hardware: Shock Cord Mounts, Nuts, and Washers (3)
Included Accessories: 1/2 Kevlar Attachment, 2-Rail Buttons
Graphics: Add Vinyl Graphics for $14.00 (Below)
Recommended Motors: (TBD)
Not Included, But Recommended Hardware: Aeropack 54mm L
Not Included, But Required Accessories: Drogue Parachute 12 inch. 1 Main Parachute 48 inch
Amraam AIM 120 65 (2.6") Loc
Diameter: 65mm (2.6 inches)
Total Length: 56.5 inches
Precision Slotted Booster: Filament wound Fiberglass
Nose Cone: 65mm (2.56 inch) LOC Nose Cone
Motor Tube: Filament Wound Fiberglass 38mm
Coupler Ebay Tube: 6" Filament Wound Fiberglass Composite
Fins: 3/32" G10 Fiberglass Composite
Bulkheads and Centering Rings: 1/8 G10 Fiberglass Composite
Deployment: Dual Deployment Capable. Get Electronics Bay Upgrade Kit.
Included Accessories: 1/2 Kevlar Attachment, 2- 10/10 Rail Buttons
Graphics: Add $10.00 for Vinyl Graphics Below
Recommended Motors: (TBD)
Not Included, But Recommended Hardware: Aeropack 38mm L
Not Included, But Required Accessories: Drogue Parachute 12 inch. 1 Main Parachute 48 inch