Exiter BT 20 Minimum Diameter.
This Rocket will fly on anything from a B4 BP to an 18mm Composite D
Airframe Diameter: BT20 (.74") (Made of Filament Wound Fiberglass)
Total Length: 15"
Weight: 1.35 oz (no motor)
Nose Cone: BT 20 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Block
Coupler Ebay Tube: None
Fins: 1/32" G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: None (18mm Motor Block)
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Included Accessories: 2-MicroRail Buttons and 3/16" lug
Graphics: ADD $6.00 for Graphics Below
Recommended Motors: B4, B6 and C6 BP as well as C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/32" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
L'il Giant BT 20 Minimum Diameter.
This Rocket will fly on anything from a B4 BP to an 18mm Composite D
Airframe Diameter: BT20 (.74") (Made of Filament Wound Fiberglass)
Total Length: 21"
Weight: 1.35 oz (no motor)
Nose Cone: BT 20 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Block
Coupler Ebay Tube: None
Fins: 1/32" G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: None (18mm Motor Block)
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-MicroRail Buttons and 3/16" lug
Graphics: ADD $6.00 forGraphics Below
Recommended Motors: B4, B6 and C6 BP as well as C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/32" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Alien Interceptor BT20 Minimum Diameter.
Airframe Diameter: BT20 (.74") (Made of Filament Wound Fiberglass)
Total Length: 25.75"
Weight: 2.66 oz (no motor)
Nose Cone: BT 20 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Block
Coupler Ebay Tube: 5" Fiberglass Coupler. Or choose full length tube below.
Fins: 1/32" G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: (18mm Motor Block)
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-MicroRail Buttons and 3/16" lug
Graphics: ADD $8.00 for Graphics Below
Recommended Motors: B6 and C6 BP as well as C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/32" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Dead Ringer BT20 Minimum Diamter
This Rocket will fly on anything from a B4 BP to an 18mm Composite D
Airframe Diameter: BT20 (.74") (Made of Filament Wound Fiberglass)
Total Length: 24"
Weight: 1.35 oz (no motor)
Nose Cone: BT 20 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Block
Coupler Ebay Tube: None
Fins: 1/32" G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: None (18mm Motor Block)
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-MicroRail Buttons and 3/16" lug
Graphics: ADD $6.00 for Graphics Below
Recommended Motors: B4, B6 and C6 BP as well as C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/32" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Red Shift Mini BT20. Minimum Diameter
This Rocket will fly on anything from a B4 BP to an 18mm Composite D
Airframe Diameter: BT20 (.74") (Made of Filament Wound Fiberglass)
Total Length: 20"
Weight: 1.32 oz (no motor)
Nose Cone: BT 20 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Block
Coupler Ebay Tube: None
Fins: 1/32" G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: None (18mm Motor Block)
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-MicroRail Buttons and 3/16" lug
Graphics: ADD $6.00 for Graphics Below
Recommended Motors: B4, B6 and C6 BP as well as C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/32" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Micro Mamba BT20
Airframe Diameter: BT20 (.74") (Made of Filament Wound Fiberglass)
Total Length: 25.75"
Weight: 2.66 oz (no motor)
Nose Cone: BT 20 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Block
Coupler Ebay Tube: 5" Fiberglass Coupler. Or choose full length tube below.
Fins: 1/32" G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: (18mm Motor Block)
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-MicroRail Buttons and 3/16" lug
Graphics: ADD $8.00 for Graphics Below
Recommended Motors: B6 and C6 BP as well as C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
See Video Below on How to Build a BT20 Fiberglass Rocket.
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/16" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Boost BT50
This Rocket will fly on anything from a C6 BP to an 18mm Composite D
Airframe Diameter: BT50 (.97") (Made of Filament Wound Fiberglass)
Total Length: 32"
Weight: 3.2 oz (no motor)
Nose Cone: BT 50 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Hook
Coupler Ebay Tube: None
Fins: 1/16: G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: 3/32" G10 Centering Rings
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-Mini Rail Buttons and 3/16" lug
Graphics: ADD $6.00 for Graphics Below
Recommended Motors: C6-3 BP and C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/16" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Mini Black Brant BT50
Sold out
This Rocket will fly on any composite 18mm D-F
Diameter: BT50 (Made of Filament Wound Fiberglass)
Total Length: 16-1/8"
Nose Cone: BT 50 Plastic Conical
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Hook
Coupler Ebay Tube: None
Fins: 1/16: G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: 3/32" G10 Centering Rings
Deployment: Motor Deploy
Recovery: 1 - Ripstop Nylon Streamer
Hardware: Kevlar Attachment Cord
Included Accessories: 2-Mini Rail Buttons and 3/16 lug
Graphics: Add $15.00 For Full Wrap Vinyl Graphics or $6.00 for "Birds and Words" Below
Recommended Motors: C6 BP,C-D 18mm Composite
Not Included, But Recommended Hardware: 18mm Retainer Will need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized G12 filament wound airframes with 1/16" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Tycho II BT 50
This Rocket will fly on anything from a B4 BP to an 18mm Composite D
Airframe Diameter: BT50 (.97") (Made of Filament Wound Fiberglass) Slotted for TTW Fins
Total Length: 21"
Weight: 2.62 oz with recovery. (no motor)
Nose Cone: BT 50 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Hook
Coupler Ebay Tube: None
Fins: 1/16: G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: 3/32" G10 Centering Rings
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-Mini Rail Buttons and 3/16" lug
Graphics: Included
Recommended Motors: B4-2 BP,C6-3 BP and C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/16" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Callisto BT50
This Rocket will fly on anything from a B4 BP to an 18mm Composite D
Airframe Diameter: BT50 (.97") (Made of Filament Wound Fiberglass)
Total Length: 22.75"
Weight: 3.08 oz with recovery. (no motor)
Nose Cone: BT 50 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Hook
Coupler Ebay Tube: None
Fins: 1/16: G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: 3/32" G10 Centering Rings
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Shock Cord
Included Accessories: 2-Mini Rail Buttons and 3/16" lug
Graphics: ADD $10.00 for Graphics Below
Recommended Motors: B4-2 BP,C6-3 BP and C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/16" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
Patriot Missile BT50
This Rocket will fly on anything from a B4 BP to an 18mm Composite D
Airframe Diameter: BT50 (.97") (Made of Filament Wound Fiberglass)
Total Length: 14-7/16"
Weight: 2.75 oz with recovery. (no motor)
Nose Cone: BT 50 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Hook
Coupler Ebay Tube: None
Fins: 1/16: G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: 3/32" G10 Centering Rings
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Kevlar Shock Cord
Included Accessories: 2-Mini Rail Buttons and 3/16" lug
Graphics: ADD $7.00 for Graphics Below
Recommended Motors: B4-2 BP,C6-3 BP and C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/16" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.
AMRAAM AIM 120B BT50
This Rocket will fly on anything from a C6 BP to an 18mm Composite D
Airframe Diameter: BT50 (.97") (Made of Filament Wound Fiberglass)
Total Length: 23.5"
Weight: 3.27 oz with recovery. (no motor)
Nose Cone: BT 50 Plastic
Motor Assembly: Filament Wound Fiberglass 18mm, Engine Hook
Coupler Ebay Tube: None
Fins: 1/16: G10 Fiberglass. CNC cut.
Bulkheads and Centering Rings: 3/32" G10 Centering Rings
Deployment: Motor Deploy
Recovery: 1 - Nylon Streamer, Kevlar Shock Cord
Hardware: Kevlar Shock Cord
Included Accessories: 2-Mini Rail Buttons and 3/16" lug
Graphics: ADD $7.00 for Graphics Below
Recommended Motors: C6-3 BP as well as C-D Composite 18mm
Not Included, But Recommended Hardware: 18mm Retainer Will Need to sand.
Get General build instruction and Sim Files Here: https://www.mach1rocketry.com/all-rocket-files.html
Now you can fly low power with a few less worries about crashes and wet weather. These BT sized filament wound airframes with 1/16" G10 fins and G10 Centering Rings will be tough enough to take the punishment of many flights.