MACH 1
  • Home
  • Kits
    • All Rocket Files
    • BT Kits Low and Mid Power >
      • BT 20 Minimum Diameter Fiberglass
      • BT 50 Fiberglass Kits
      • BT 55 Fiberglass Kits
      • 38mm XL (BT60) Fiberglass Kits
    • Minimum Diameter BT60 (38mmXL) kits
    • 2.2 in (54mm) kits
    • 2.6 in (65mm) kits
    • 3 in (76mm) kits
    • 4 in (100mm) kits
  • Components
    • Building Aids
    • Buttons and Lugs
    • Aluminum Components >
      • Aluminum Bulkheads
      • Replacement Tips
    • Electronics Bay Parts and Kits
    • Fiberglass Components >
      • Fiberglass Nosecones
      • Fiberglass Couplers Standard Lengths
      • Fiberglass Coupler By The Inch
      • Fiberglass Airframes
      • G10 Fiberglass Centering Rings
      • G10 Fiberglass Bulkheads
    • Hardware.
    • Plastic Nose Cones
    • Retainers
  • Recovery
    • Nylon Parachutes >
      • Standard Mill Nylon Parachutes
      • Thin Mil Parachutes
    • Shock Cord and Hardware
  • Building Information
  • Contact
  • Custom Shop
    • Custom Rocket Projects Links
  • Electronics Bay Parts and Kits
  • >
  • G10 Fiberglass 6" Nosecone Electronics Bulkhead (Removable Kit)

G10 Fiberglass 6" Nosecone Electronics Bulkhead (Removable Kit)

SKU: NEB6
$38.99
$38.99
Unavailable
per item
1/4" G10 Stepped Fiberglass Bulkhead fits our 6" Nosecone Coupler. Designed to be used with our nosecones or any fiberglass nose cone with a removable tip. ​
Kit contains:
1 GPO3 Sled.
1 Brass or Nickle sled rail guide.
1 Bulkhead Electronics bay cover (preassembled) 
1 Glue in bulkhead.
1 threaded rod (enough to reach from the tip to the bulkhead cover. (On 5:1 ogive, 4:1 ogive and 3:1 ogive cones)
​1 Assembly Instructions. 

Where the traditional shock cord mount mounted to a glue in bulkhead, this system transfers all stress to the tip. You would have to pull the tip through the cone for failure. (Not happening. Along with this added security the system also creates a space for Electronics to be easily mounted in the nose cone. Also (on new nose cones) the coupler is not glued in allowing easy access to the interior of the nose cone for adjusting nose weight. 
  • Facebook
  • Twitter
  • Pinterest
  • Google+
Sold out
Add to Cart

  • Home
  • Kits
    • All Rocket Files
    • BT Kits Low and Mid Power >
      • BT 20 Minimum Diameter Fiberglass
      • BT 50 Fiberglass Kits
      • BT 55 Fiberglass Kits
      • 38mm XL (BT60) Fiberglass Kits
    • Minimum Diameter BT60 (38mmXL) kits
    • 2.2 in (54mm) kits
    • 2.6 in (65mm) kits
    • 3 in (76mm) kits
    • 4 in (100mm) kits
  • Components
    • Building Aids
    • Buttons and Lugs
    • Aluminum Components >
      • Aluminum Bulkheads
      • Replacement Tips
    • Electronics Bay Parts and Kits
    • Fiberglass Components >
      • Fiberglass Nosecones
      • Fiberglass Couplers Standard Lengths
      • Fiberglass Coupler By The Inch
      • Fiberglass Airframes
      • G10 Fiberglass Centering Rings
      • G10 Fiberglass Bulkheads
    • Hardware.
    • Plastic Nose Cones
    • Retainers
  • Recovery
    • Nylon Parachutes >
      • Standard Mill Nylon Parachutes
      • Thin Mil Parachutes
    • Shock Cord and Hardware
  • Building Information
  • Contact
  • Custom Shop
    • Custom Rocket Projects Links